Momentum Camera Firmware Download

It is recommended to use your desktop computer when updating your camera’s firmware.

For your convenience, cameras that are connected to the internet will receive firmware updates automatically.

Axel HD Smart Home Security Camera

Update Axel Firmware

Latest Version: 1.2.11
Version Date: November 9, 2020

Niro Wi-Fi Garage Door Controller

Update Link

Latest Version: 1.2.6
Version Date: September 2, 2020

Cori HD Smart Home Security Camera

Update Cori Firmware

Latest Version: 1.2.11
Version Date: November 9, 2020

Aria LED Floodlight Camera

Update Aria Firmware

Latest Version: 1.2.11
Version Date: November 9, 2020

Robbi 1080P Smart Camera

Update Link 1

Update Link 2

Latest Version: 1.3.3
Version Date: November 9, 2020

Knok Video Doorbell

Update Link 1

Update Link 2

Update Link 3

Latest Version: 1.2.11
Version Date: November 9, 2020

Momentum Axel HD Smart Home Security Camera

Firmware Update Instructions

Please confirm this is your camera

Step 1 Confirm your camera matches the picture shown

Step 2 Download the new firmware from the link below

Note: DO NOT CHANGE THE FILE NAME

Axel Firmware File Download

Step 3 Upload the file onto a microSD card

Note: Ensure the file name is ezviz.dav and that the microSD card capacity does not exceed 128GB

Step 4 Unplug your camera and insert the microSD card from Step 3

Step 5 Plug in the camera and wait for the camera’s indicator light to start blinking blue. This may take a few minutes.

Step 6 Important: Remove the microSD card to complete the update

Note: If you would like to use the microSD card to store recorded clips, remove the firmware file ezviz.dav before reinserting the microSD card

Momentum Niro Wi-Fi Garage Door Controller

Firmware Update Instructions

Please confirm this is your camera

Step 1 Confirm your camera matches the picture shown

Step 2 Download the new firmware from the link below

Note: DO NOT CHANGE THE FILE NAME

Niro Firmware File Download

Step 3 Upload the file onto a microSD card

Note: Ensure the file name is ezviz.dav and that the microSD card capacity does not exceed 128GB

Step 4 Unplug your camera and insert the microSD card from Step 3

Step 5 Plug in the camera and wait for the camera’s indicator light to start blinking blue. This may take a few minutes.

Step 6 Important: Remove the microSD card to complete the update

Note: If you would like to use the microSD card to store recorded clips, remove the firmware file ezviz.dav before reinserting the microSD card